Rigol DG1012

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
2-38
To Generate Burst Signal
Burst Function can generate versatile waveforms in burst, which can last specific
times of waveform cycle(N-Cycle Burst), or when the external gated signals (Gated
Burst) is applied, any waveform could be used, but noise can only be used in Gated
Burst.
Press the Burst button, in the Normal Mode, the operation menu will appear on the
screen, see Figure 2-59. Set the Waveform parameters by using the operation menu.
Figure 2-44
Burst Waveform Parameter Setting Interface