RIGOL
© 2008 RIGOL Technologies, Inc. 2-49
User’s Guide for DG10× 2 Series
To Set the Utility Function
With the Utility Function, you can set the Sync On/Off, Channel Output Parameters,
Channel Coupling, Channel Copy, Counter Measurement, Interface Parameter, System
Setting and Test/Cal Parameter.
Sync switch offers the option to choose the Sync Signal or not.
The Channel Output parameters provide the parameter setting for
Load/Impedance, Normal/ Inverse.
Channel Coupling provides Frequency/Phase coupling of the two channels.
Channel Copy provides parameter copy of the two channels.
Counter provides Frequency measurement function.
The Interface Parameter offers USB serial-number viewing.
The System Setting provides the setting for Language, Display, Beep, Screen
Guard, Format, Power System Configure and default setting
The Test/Cal Parameter provides the self-testing and calibration storage as well as
the password and safety switch.
To Next Page
Loading...
