Rigol DG1032Z Calibration Guide

RIGOL
II DG1000Z Calibration Guide
Document Overview
This manual gives a detailed introduction of the calibration notices and calibration
process of DG1000Z.
Subjects in this Manual:
Chapter 1 Calibration Notices
This chapter gives a detailed introduction of the recommended calibration interval,
calibration safety, the method to stop the calibration and the related information, the
method to acquire the calibration service, the recommended test devices and the
notices during the test.
Chapter 2 Calibration Process
This chapter gives a detailed introduction of the calibration interface and the
calibration process of each calibration item of DG1000Z.
Format Conventions in this Manual:
1. Button
The front-panel key is denoted by the format of “Text Box + Button Name
(Bold)” in the manual, for example, Utility denotes the “Utility” key.
2. Menu
The menu is denoted by the format of “Character Shading + Menu Word (Bold)”
in the manual, for example, System denotes the “System” menu item under
Utility.
3. Operation Step
The next step of the operation is denoted by an arrow “” in the manual. For
example, Utility  System denotes pressing Utility at the front panel and
then pressing System.
Content Conventions in this Manual:
DG1000Z series function/arbitrary waveform generator includes the following models.
Unless otherwise noted in this manual, DG1062Z is taken as an example to introduce
the calibration notices and calibration process of DG1000Z series.
Model Number of Channels Max. Output Frequency
DG1062Z 2 60MHz
DG1032Z 2 30MHz

Rigol DG1032Z Specifications

General

Brand	Rigol
Model	DG1032Z
Category	Inverter
Language	English