Appendix RIGOL
DG1000Z Performance Verification Guide
Edge Time (limited by the current frequency and pulse width settings)
Overshoot
Typical (1Vpp)
≤5%
Jitter (rms)
Typical (1Vpp)
≤5MHz: 2ppm+200ps
>5MHz: 200ps
Arb
Waveform Length
8pts to 2Mpts (16Mpts optional)
8pts to 8Mpts (16Mpts optional)
Vertical Resolution 14bits
Sample Rate 200MSa/s
Minimum Rise/Fall
Time
Typical (1Vpp)
<10ns
Jitter (rms)
Typical (1Vpp)
≤5MHz: 2ppm+200ps
>5MHz: 200ps
Edit Method Edit Points, Edit Block, Insert Waveform
Harmonic
Harmonic Order ≤8
Harmonic Type Even, Odd, All, User
Harmonic Amplitude can be set for all harmonics
Harmonic Phase can be set for all harmonics
Output Characteristics
Amplitude (into 50 Ω)
Range
≤10MHz: 1.0mVpp to 10Vpp
≤30MHz: 1.0mVpp to 5.0Vpp
≤60MHz: 1.0mVpp to 2.5Vpp
Accuracy
Typical (1kHz Sine, 0V Offset, >10mVpp, Auto)
±1% of setting ± 1mV
Flatness
Typical (Sine 2.5Vpp)
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
Units Vpp, Vrms, dBm
Resolution 0.1mVpp or 4digits
To Next Page
Loading...
