Rigol DG4000 Series

To Next Page

To Previous Page

Description

Trigger the instrument to generate an output.



Explanation

This command is only available when Sweep or Burst is enabled (refer to the

[:SOURce<n>]:SWEep:STATe OFF|ON or [:SOURce<n>]:BURSt[:STATe] ON|OFF

command) and the trigger source is set to manual (refer to the

[:SOURce<n>]:SWEep:TRIGger:SOURce INTernal|EXTernal|MANual or

[:SOURce<n>]:BURSt:TRIGger:SOURce INTernal|EXTernal|MANual command).



Related Commands

[:SOURce<n>]:SWEep:STATe OFF|ON

[:SOURce<n>]:SWEep:TRIGger:SOURce INTernal|EXTernal|MANual

[:SOURce<n>]:BURSt[:STATe] ON|OFF

[:SOURce<n>]:BURSt:TRIGger:SOURce INTernal|EXTernal|MANual

Other manuals for Rigol DG4000 Series