SOURce Command Subsystem
[:SOURce<n>] commands are used to set the related parameters of basic
waveforms, arbitrary waveforms, harmonics as well as the output signals of
Mod, Sweep and Burst. Wherein, <n> represents the corresponding channel (1
or 2) and if it is not set, the operation will be executed on CH1 by default.
The following types are contained:
[:SOURce<n>]:APPLy
[:SOURce<n>]:BURSt
[:SOURce<n>]:FREQuency
[:SOURce<n>]:FUNCtion
[:SOURce<n>]:HARMonic
[:SOURce<n>]:MARKer
[:SOURce<n>]:MOD
[:SOURce<n>]:PERiod
[:SOURce<n>]:PHASe
[:SOURce<n>]:PULSe
[:SOURce<n>]:SWEep
[:SOURce<n>]:VOLTage
To Next Page
Loading...
