Rigol DG4000 Series

[:TRACe]:DATA:POINts

Syntax
[:TRACe]:DATA:POINts VOLATILE,<value>|MINimum|MAXimum
[:TRACe]:DATA:POINts? VOLATILE[,MINimum|MAXimum]

Description
Set the number of the initial points of the edited waveform.
Query the number of the initial points of the edited waveform.

Parameter
Name Type Range Default
<value> Integer 2 to 16384 --
Explanation
This command changes the current output to volatile waveform output
automatically and initialize the volatile waveform to 0.
After sending this command, you can send the [:TRACe]:DATA:VALue VOLATILE,
<point>,<data> command to modify the voltage of the specified point.
Return Format
The query returns an integer between 2 and 16384.