Parameter
Name Type Range Default
<file_name> ASCII Character
Character string enclosed in double
quotation marks (include suffix), the length
is limited to 40 characters
--
Explanation
This command is only applicable to external memory. If the file specified in
<file_name> does not exist, "Error generated by remote interface command!" is
displayed.
The types of files available are state file (.RSF) and arbitrary waveform file (.RAF).
Only the data of the current channel is stored when storing the arbitrary waveform
file.
Example
The command below stores the counter.RSF file under the current directory.
:MMEMory:STORe "counter.RSF"
To Next Page
Loading...
