Parameter
Name Type
Range
1
Default
<freq> Consecutive Real Number 1 μHz to 40 MHz 1 kHz
<amp> Consecutive Real Number -- 5 Vpp
<offset> Consecutive Real Number --
0 V
DC
<phase> Consecutive Real Number 0° to 360° 0°
Note
1
: for different models, the ranges of the parameters are different. Besides,
<amp> is limited by the impedance and frequency/period settings and <offset> is
limited by the impedance and amplitude/high level settings (for details, refer to the
User's Guide). The ranges listed in the table are for DG4162 when the impedance is
set to "HighZ".
To Next Page
Loading...
