Parameter
Name Type
Range
1
Default
<freq> Consecutive Real Number 1 μHz to 80 MHz 1 kHz
<amp> Consecutive Real Number -- 5 Vpp
<offset> Consecutive Real Number --
0 V
DC
<phase> Consecutive Real Number 0° to 360° 0°
Note
1
: for different models, the ranges of the parameters ar
e different. Besides, <amp>
is limited by the impedance and frequency/period settings and <offset> is limited by the
impedance and amplitude/high level settings (for details, refer to the User's Guide). The
ranges listed in the table are for DG4162 when the impedance is set to "HighZ" and the
harmonic order is set to "2".
To Next Page
Loading...
