Parameter
Name Type
Range
1
Default
<freq>
Consecutive Real
Number
1 μHz to 40 MHz 1 kHz
<amp>
Consecutive Real
Number
-- 5 Vpp
<offset>
Consecutive Real
Number
--
0 V
DC
<delay>
Consecutive Real
Number
0 ns to pulse period 0 ns
Note
1
: for different models, the ranges of the parameters are different. Besides,
<amp> is limited by the impedance and frequency/period settings and <offset> is
limited by the impedance and amplitude/high level settings (for details, refer to the
User's Guide). The ranges listed in the table are for DG4162 when the impedance is
set to "HighZ".
To Next Page
Loading...
