Parameter
Name Type
Range
1
Default
<freq>
Consecutive Real
Number
1 μHz to 4 MHz 1 kHz
<amp>
Consecutive Real
Number
-- 5 Vpp
<offset>
Consecutive Real
Number
--
0 V
DC
<phase>
Consecutive Real
Number
0° to 360° 0°
Note
1
: for different models, the ranges of the parameters are different. Besides,
<amp> is limited by the impedance and frequency/period settings and <offset>
is limited by the impedance and amplitude/high level settings (for details, refer
to the User's Guide). The ranges listed in the table are for DG4162 when the
impedance is set to "HighZ".
To Next Page
Loading...
