Rigol DG4000 Series - Page 273

Parameter
Name Type
Range
1
Default
<freq>
Consecutive Real
Number
1 μHz to 160 MHz 1 kHz
<amp>
Consecutive Real
Number
-- 5 Vpp
<offset>
Consecutive Real
Number
--
0 V
DC
<phase>
Consecutive Real
Number
0° to 360° 0°
Note
1
: for different models, the ranges of the parameters are different. Besides, <amp>
is limited by the impedance and frequency/period settings and <offset> is limited by the
impedance and amplitude/high level settings (for details, refer to the User's Guide). The
ranges listed in the table are for DG4162 when the impedance is set to "HighZ".