Parameter
Name Type
Range
1
Default
<freq>
Consecutive Real
Number
1 μHz to 40 MHz 1 kHz
<amp>
Consecutive Real
Number
-- 5 Vpp
<offset>
Consecutive Real
Number
--
0 V
DC
<phase>
Consecutive Real
Number
0° to 360° 0°
Note
1
: for different models, the ranges of the parameters are different. Besides,
<amp> is limited by the impedance and frequency/period settings and <offset> is
limited by the impedance and amplitude/high level settings (for details, refer to the
User's Guide). The ranges listed in the table are for DG4162 when the impedance is
set to "HighZ".
Explanation
When the current arbitrary waveform is DC, the instrument will directly pick up the
offset parameter to modify the DC offset while the frequency, amplitude and phase
parameters will be discarded.
To Next Page
Loading...
