Parameter
Name Type Range Default
<n> Discrete 1|2 1
<user> ASCII String
X000000000000000 to
X111111111111111
X000000000000000
Explanation
In the user-defined harmonics ([:SOURce<n>]:HARMonic:TYPe), users can set the order of
harmonic of the user-defined output harmonic and the highest order is 16. A 16-bit binary
data is used to denote the output statuses of the 16 orders of harmonics with the leftmost bit
denoting the fundamental waveform (it is always X and cannot be modified) and the
remaining 15 bits denoting the second order of harmonic to the 16
th
order of harmonic
respectively from left to right. 1 denotes turning on the output of the corresponding order of
harmonic; 0 denotes turning off the output of the corresponding order of harmonic. For
example, set the 16-bit data to X001000000000001 which denotes outputting the
fundamental waveform, the 4
th
order of harmonic and the 16
th
order of harmonic.
When [:SOURce<n>]
is omitted, the command sets the related parameters of CH1 by
default.
Return Format
The query returns a string between X000000000000000 and X111111111111111.
For example, X001000000000001.
To Next Page
Loading...
