Parameter
Name Type Range Default
<frequency>
Consecutive Real
Number
2 mHz to 50 kHz 100 Hz
Explanation
This command is only available when internal modulation source is selected.
Return Format
The query returns the frequency in scientific notation.
Example
The command below sets the frequency of the modulating waveform to 25 Hz.
:MOD:PM:INTernal:FREQuency 25
The query below returns 2.500000E+01.
:MOD:PM:INTernal:FREQuency?
Related Commands
[:SOURce<n>]:MOD:PM:SOURce INTernal|EXTernal
[:SOURce<n>]:MOD:PM:SOURce?
To Next Page
Loading...
