Parameter
Name Type Range Default
-- Keyword POSitive|NEGative POSitive
Explanation
This command is only available when external trigger source is selected.
Return Format
The query returns POS or NEG.
Example
The command below sets the edge type to falling edge.
:SWEep:TRIGger:SLOPe NEGative
The query returns NEG.
:SWEep:TRIGger:SLOPe?
Related Commands
[:SOURce<n>]:SWEep:TRIGger:SOURce INTernal|EXTernal|MANual
[:SOURce<n>]:SWEep:TRIGger:SOURce?
To Next Page
Loading...
