Parameter
Name Type Range Default
-- Keyword INTernal|EXTernal INTernal
Explanation
DG4000 provides internal 10MHz clock source and accepts external clock source
input from the [10MHz In/Out] connector at the rear panel. It can also output
clock source from the [10MHz In/Out] connector for other devices.
Return Format
The query returns INT or EXT.
Example
The command below sets the reference clock source to EXTernal (this setting is
valid when the system detects external clock source).
:SYSTem:ROSCillator:SOURce EXTernal
The query below returns EXT.
:SYSTem:ROSCillator:SOURce?
To Next Page
Loading...
