RIGOL Chapter 7 Burst
DG4000 User's Guide
(manual trigger).
When Burst is enabled, press Type to select "Infinite". A schematic diagram of
infinite cycle pulse will be displayed on the screen.
Figure 7-2 Infinite Burst
Gated Burst
In Gated Mode, the generator controls the waveform output according to the
external signal level from the [Mod/FSK/Trig] connector at the rear panel.
Waveform functions which support Gated Burst are Sine, Square, Ramp, Pulse,
Noise and arbitrary waveforms (except DC).
When the gated signal is "True", the generator outputs a continuous waveform;
when the gated signal is "False", the generator completes the current period, and
To Next Page
Loading...
