Chapter 4 Harmonic Output RIGOL
DG4000 User's Guide
To Set the Harmonic Phase
After entering the harmonic setting menu, press Phase to set the phase of each
order of harmonic.
1. SN: press this softkey to select the sequence number of the harmonic to be
set.
2. Phase: press this softkey to set the phase of the harmonic selected. Use the
numeric keyboard to input the phase value and then select the unit "°" from
the pop-up menu or use the direction keys and knob to modify the current
value. For the input method of phase value, refer to the introduction in
"Parameter Setting Method".
To Next Page
Loading...
