Rigol DG4202

Chapter 7 Burst RIGOL
DG4000 User's Guide
7-9
width from the [Mod/FSK/Trig] connector at the start of burst.
 In external trigger, the [Mod/FSK/Trig] connector is used as the input
terminal of external trigger signal and has no trigger output.
When "Int" or "Manual" trigger is selected, press TrigOut to specify the edge of
the trigger output signal and the default is "Off".
 Off: disable the trigger output signal.
 Leading: output the trigger signal at the rising edge.
 Trailing: output the trigger signal at the falling edge.