RIGOL
II DG800 Programming Guide
Document Overview
This manual introduces how to program the signal generator over the remote interfaces in details.
Main Topics in this Manual:
Chapter 1 Programming Overview
This chapter introduces how to build the remote communication between the signal generator and the PC;
how to control the signal generator remotely. It also introduces the syntax, symbols, parameter types, and
abbreviation rules of the SCPI commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameters, and usages of each DG800 command in A-Z
order.
Chapter 3 Application Instances
This chapter provides the application examples of the main functions of the signal generator. In the
examples, a series of commands are combined to realize the basic functions of the signal generator.
Chapter 4 Programming Examples
This chapter illustrates how to control DG800 by programming in the development environments such as
Visual C++, Visual Basic, and LabVIEW.
Chapter 5 Appendix
This chapter provides the command list and the factory settings.
Tip
For the latest version of this manual, download it from the official website of RIGOL (www.rigol.com).
Format Conventions in this Manual:
1. Keys:
The keys on the front panel are usually denoted by the format of "Key Name (Bold) + Text Box". For
example, Utility denotes the Utility key.
2. Menu Labels:
The menu labels are usually denoted by the format of "Menu Word (Bold) + Character Shading". For
example, System Setting.
3. Operation Procedures:
"" represents the next step of operation. For example, Utility System Setting denotes that first
press Utility on the front panel, and then tap the System Setting menu label.
Content Conventions in this Manual:
DG800 series function/arbitrary waveform generator includes the following models: Unless otherwise
specified, this manual takes DG832 as an example to introduce each command of the DG800 series.
To Next Page
Loading...
Need help?
General
