Rigol DG800 Series - Page 98

RIGOL Chapter 2 Command System
2-84 DG800 Programming Guide
[:SOURce[<n>]]:FUNCtion:SEQuence:EDGETime
Syntax
[:SOURce[<n>]]:FUNCtion:SEQuence:EDGETime <seconds>
[:SOURce[<n>]]:FUNCtion:SEQuence:EDGETime?
Description
Sets the edge time of the sequence waveform of the specified channel.
Queries the edge time of the sequence waveform of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<seconds>
Real
8 ns to (1/sample rate)/1.25
7 ns
Remarks
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
 This command is only valid when the sequence filter is in interpolation mode.
Return Format
The query returns the edge time of the sequence waveform in scientific notation, with 7 effective digits. For
example, 5.000000E-07 (the edge time is 0.5 μs).
Example
:SOUR1:FUNC:SEQ:EDGET 0.0000005 /*Sets the edge time of the sequence waveform of CH1 to 0.5 μs.*/
:SOUR1:FUNC:SEQ:EDGET? /*Queries the edge time of the sequence waveform of CH1 and the
query returns 5.000000E-07.*/
[:SOURce[<n>]]:FUNCtion:SEQuence:FILTer
Syntax
[:SOURce[<n>]]:FUNCtion:SEQuence:FILTer {SMOOth|STEP|INSErt}
[:SOURce[<n>]]:FUNCtion:SEQuence:FILTer?
Description
Sets the Sequence filter type of the specified channel.
Queries the Sequence filter type of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
{SMOOth|STEP|INSErt}
Discrete
SMOOth|STEP|INSErt
INSErt
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
Return Format
The query returns SMOO, STEP or INSE.
Example
:SOUR1:FUNC:SEQ:FILT STEP /*Sets the Sequence filter type of CH1 to STEP.*/
:SOUR1:FUNC:SEQ:FILT? /*Queries the Sequence filter type of CH1 and the query returns STEP.*/