Rigol DP832 Performance Verification Manual

Chapter 2 Constant Voltage Tests RIGOL
DP800 Performance Verification Manual
2-3
Note:
During the CV tests, make connections according to Figure 2-1 for the normal
channels (namely the channels that do not support the Sense function) of the DP800
series power supply. For the channels that support the Sense function (CH2 of
DP821A and DP811A), make connections according to Figure 2-2 (note to
short-circuit the (S+) and (+) terminals, (S-) and (-) terminals of the channel
respectively) and turn on the Sense function of the channel during the test process to
measure the specifications under Sense mode.

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD