Rigol DS1052E Service Guide

Chapter 1 Specifications RIGOL
Service Guide for DS1000E, DS1000D Series
1-1
Chapter 1 Specifications
All specifications apply to DS1000E, DS1000D series Oscilloscopes unless noted
otherwise. To meet these specifications, two conditions must first be met:
 The instrument must have been operating continuously for thirty minutes within
the specified operating temperature.
 Do perform the “Self Cal” operation, accessible through the Utility menu, if the
operating temperature changes by more than 5°C.
NOTE: All specifications are guaranteed unless noted “typical”.

Rigol DS1052E Specifications

General

Bandwidth	50 MHz
Sample Rate	1 GSa/s
Channels	2
Memory Depth	1 Mpts
Vertical Sensitivity	2 mV/div to 10 V/div
Input Impedance	1 MΩ ± 2% || 15 pF ± 3 pF
Vertical Resolution	8 bits
Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Power Supply	100-240 V AC, 45-440 Hz
Display	5.7 inch TFT LCD
Interfaces	USB Host, USB Device, RS-232
Dimensions	303 mm x 154 mm x 133 mm