Rigol DS1052E Service Guide

RIGOL Chapter 5 Disassembly and Assembly
Service Guide for DS1000E, DS1000D Series
5-2
Notices
Notices:
 Don’t disassemble the product except the work needed.
 Disassemble only can be done by qualified person.
 Cut the power before disassembling.
 Take ESD glove under disassembling.
 Use proper tools and follow the disassembly sequence.
 Prevent metallic parts from transfiguration and avoid being scratched when
disassembling.
Required tools:
 TORX drivers (T6, T10, T20)
 BNC sleeve
WARNING
Before disassembling, please make sure the power has been cut off. The
operator should be trained or had related qualification.
!

Rigol DS1052E Specifications

General

Bandwidth	50 MHz
Sample Rate	1 GSa/s
Channels	2
Memory Depth	1 Mpts
Vertical Sensitivity	2 mV/div to 10 V/div
Input Impedance	1 MΩ ± 2% || 15 pF ± 3 pF
Vertical Resolution	8 bits
Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Power Supply	100-240 V AC, 45-440 Hz
Display	5.7 inch TFT LCD
Interfaces	USB Host, USB Device, RS-232
Dimensions	303 mm x 154 mm x 133 mm