Rigol DS1054Z Quick Guide

RIGOL
MSO1000Z/DS1000Z Quick Guide
17
User Interface
MSO1000Z/DS1000Z provides 7.0 inches, WVGA (800*480) 160,000 color TFT LCD.
Figure 12 User Interface
1. Auto Measurement Items
Provide 16 horizontal (HORIZONTAL) and 17 vertical (VERTICAL) measurement
parameters. Press the softkey at the left of the screen to activate the
corresponding measurement item. Press MENU continuously to switch between
the horizontal and vertical parameters.
2. Digital Channel Label/Waveform
The logic high level of the digital waveform is displayed in blue and the logic low
level in green. Its edge is displayed in white. The label and waveform of the
digital channel currently selected are displayed in red. The group set function in
logic analyzer menu can divide the digital channels into four groups, channel
labels in the same group are marked with the same color, labels in different
groups are marked with different colors.
Note: This function is only applicable to MSO1000Z-S and MSO1000Z models
oscilloscopes.
12 13 14 15 16 17 18 19 20 21 22
1 2 3 4 5 6 7 8 9 10 11

Rigol DS1054Z Specifications

General

Channels	4
Bandwidth	50 MHz
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Display	7 inch TFT LCD (800x480)
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Trigger Types	Edge, Pulse, Video, Slope
Connectivity	USB Host, USB Device, LAN
Input Impedance	1 MΩ
Power Supply	100-240 VAC, 45-440 Hz