Rigol DS1104B - Automatic Measurements

RIGOL Command Systems
Programming Guide for DS1000B Series
2-116
Other Commands
The following commands are used to set some additional functions: counter, beeper,
system language, real-time clock and the state of AUTO key.
Other Commands include:
 :COUNter:ENABle
 :BEEP:ENABle
 :BEEP:ACTion
 :INFO:LANGuage
 :RTC
 :AUToscale:DISable
 :AUToscale:ENable
 :AUToscale?
We will give detailed introductions for each command in the following parts.