Rigol DS1104B - Probe Compensation

Command Systems RIGOL
Programming Guide for DS1000B Series
2-15
DISPlay Commands
DISPlay Commands are used to set the display system.
DISPlay Commands include:
 :DISPlay:TYPE
 :DISPlay:GRID
 :DISPlay:PERSist
 :DISPlay:MNUDisplay
 :DISPlay:MNUStatus
 :DISPlay:SCReen
 :DISPlay:CLEar
 :DISPlay:BRIGhtness
 :DISPlay:INTensity
 :DISPlay:DATA?
We will give detailed introductions for each command in the following parts.