RIGOL Command Systems
Programming Guide for DS1000B Series
19. :MEASure:NDUTycycle?
Command Format:
:MEASure:NDUTycycle? [<source>]
Function:
The command measures the negative duty cycle of signal from <source>. The
<source> may be CHANnel1, CHANnel2, CHANnel3 or CHANnel4.
Returned Format:
The query returns as 5.000e001, and the unit is %.
20. :MEASure:PDELay?
Command Format:
:MEASure:PDELay? [<source A>,<source B>]
Function:
The command measures the delay between <sourceA> and <sourceB> relative
to the rising edge. The <source> may be CHANnel1, CHANnel2, CHANnel3 or
CHANnel4.
Returned Format:
The query returns as <-1.000 e-004, and the unit is s.
21. :MEASure:NDELay?
Command Format:
:MEASure:NDELay? [<source A>,<source B>]
Function:
The command measures the delay between <sourceA> and <sourceB> relative
to the falling edge. The <source> may be CHANnel1, CHANnel2, CHANnel3 or
CHANnel4.
Returned Format:
The query returns as <-1.000 e-004, and the unit is s.
To Next Page
Loading...
