Chapter 1 Disassembly and Assembly RIGOL
DS8000-R Service Guide 5
Disassemble the Hanging Ear
Figure 1-3 Disassemble the Hanging Ear
Part Description:
① 6 screws (M3x6 torx flat head countersunk screw, used for fastening the two hanging ears); not
all screws are indicated in the above figure.
Disassembly Steps:
1. Use the T10 screwdriver to remove 6 screws (①) that secure the two hanging ears.
2. Remove the two hanging ears gently.
To Next Page
Loading...
