Rigol DS8000-R Series - Disassemble the Probe Board

RIGOL Chapter 1 Disassembly and Assembly
8 DS8000-R Service Guide
Disassemble the Probe Board
Figure 1-6 Disassemble the Probe Board
Part Description:
① 5 screws (M3x6 torx flat head countersunk screw, used for fastening the probe board)
Disassembly Steps:
1. Use the T10 screwdriver to remove 5 screws (①) that secure the probe board.
2. Take off the probe board gently.
① ①
① ①
① ①
① ①
① ①
Probe Board