Chapter 2 Front Panel Operation RIGOL
User’s Guide for DSA800/E Series
11. File Type
Set the printing file type to “Default” or “Exif/JPEG”. When “Default” is
selected, the type depends on the printer currently connected.
Tip:
The analyzer can automatically identify the characteristics of the printer,
such as the page size, during the printer installation. If some
configuration is not supported by the current printer, the corresponding
menu in the analyzer is invalid. For example, if the current printer does
not support color printing, the “Color” option in the Palette menu is
To Next Page
Loading...
Need help?
General
