Chapter 4 Troubleshooting&Message RIGOL
User’s Guide for DSA800/E Series
19 Please select the valid file type.
32
Network settings will be reset, press yes to continue?
40 Welcome to Super Mode.
Welcome to Production Mode.
Welcome to Maintenance Mode.
Welcome to Color Egg Mode.
Please confirm, and press again.
51 The display was locked, please press Esc to unlock.
52 Display unlocked.
54 Please select the valid file.
55 It is not allowed to delete folder.
56 Fail to load file.
57 Local disk is being formatted, please wait for a moment.
58 Formatting is finished.
60 Software version does not match, file loading fails.
61 Invalid source.
62 Select where to load, antenna, cable, user or others.
63 Option is activated.
64 Option is deleted.
65 The edited frequency already exists.
80 Limit lines are cleaned because of change of X Axis type.
81 Copy completed.
82 Do you want to overwrite the existing file?
Please select the file to be copied.
Fail to copy, as the destination is the same as the source.
Updating the reference trace…
87 Exit line mode.
88 Please press ESC to exit remote control mode.
89 The USB cable became disconnectable.
90 Safety clear succeeded.
91 Press the keys to be locked and then press ESC.
To Next Page
Loading...
Need help?
General
