Rigol RSA5000 Series Performance Verification Guide

RIGOL Chapter 2 Performance Verification Test
2-4 RSA5000 Performance Verification Guide
Test Record Form
Center
Frequency
Maximum
Peak
Minimum
Peak
Average
[1]
Measurement
Result
[2]
Limit
Pass/Fail
PA off
50 kHz
9 kHz to 100 kHz:
<-120 dBm (typical)
100 kHz~20 MHz:
<-135 dBm, <-140 dBm
(typical)
20 MHz to 1.5 GHz:
<-142 dBm, <-145 dBm
(typical)
1.5 GHz to 2.7 GHz:
<-140 dBm, <-143 dBm
(typical)
2.7 GHz to 3.2 GHz:
<-138 dBm, <-141 dBm
(typical)
3.2 GHz to 5.5 GHz:
<-138 dBm, <-143 dBm
(typical)
5.5 GHz to 6.5 GHz:
<-136 dBm, <-141 dBm
(typical)
1.04 MHz
50.04 MHz
2.004 GHz
3.004 GHz
4.004 GHz
6.204 GHz
PA on
1.04 MHz
100 kHz~20 MHz:
<-152 dBm, <-160 dBm
(typical)
20 MHz to 1.5 GHz:
<-162 dBm, <-165 dBm
(typical)
1.5 GHz to 2.7 GHz:
<-160 dBm, <-163 dBm
(typical)
2.7 GHz to 3.2 GHz:
<-158 dBm, <-161 dBm
(typical)
3.2 GHz to 5.5 GHz:
<-156 dBm, <-161 dBm
(typical)
5.5 GHz to 6.5 GHz:
<-154 dBm, <-159 dBm
(typical)
50.04 MHz
2.004 GHz
3.004 GHz
4.004 GHz
6.204 GHz
Note
[1]
: Average = (Maximum Peak + Minimum Peak)/2 (dimensionless calculation)
Note
[2]
: Measurement Result = Average – 10 × lg1000 = Average - 30 dB

Rigol RSA5000 Series Specifications

General

Brand	Rigol
Model	RSA5000 Series
Category	Measuring Instruments
Language	English