Need help?Do you have a question about the ring 5AT3T5 and is the answer not in the manual?
General| Brand | ring |
|---|---|
| Model | 5AT3T5 |
| Category | Accessories |
| Language | English |
Open Ring app, select Set Up Device, and follow in-app instructions for setup.
Scan the provided code to identify your Ring device for fast and easy setup.
Locate your existing doorbell chime by listening for it after ringing your doorbell.
Essential safety step to turn off power at the breaker before working with electrical wires.
The Jumper Cable bypasses and disables your existing doorbell chime.
Connect jumper cable ends to the "Front" and "Trans" terminals of your chime.
Remove your doorbell from the wall and disconnect wires, ensuring they don't fall back.
Grasp the bottom of the faceplate and pull to remove it from the doorbell.
Drill holes and insert wall anchors for stucco, brick, or concrete mounting.
Loop wires around terminals on the rear of the Ring Doorbell and tighten to secure.
Mount the doorbell with screws, feeding excess wiring back into the wall first.
Turn power back on at the breaker and wait for the doorbell to power up.
Download the Ring app to guide setup and manage your doorbell features.
Re-attach faceplate and use the small security screw to secure the doorbell.
Crucial safety instructions to prevent fire, electric shock, injury, or damage.
Safely connect the doorbell to home wiring by turning off power at the breaker.
Details device name, model, electrical rating, and temperature rating.
Device complies with FCC Rules, including radiation exposure limits.
Device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
Device meets general public exposure thresholds for electromagnetic fields.
To Next Page
