Need help?Do you have a question about the ring VIDEO DOORBELL PRO and is the answer not in the manual?
General| LED type | IR |
|---|---|
| Speakerphone | Yes |
| Product color | Multicolor |
| Connectivity technology | Wireless |
| Field of view | 160 ° |
| Supported video modes | 1080p |
| Operating temperature (T-T) | -20 - 48 °C |
Weight and Dimensions| Bell depth | 20 mm |
|---|---|
| Bell width | 47 mm |
| Bell height | 114 mm |
| Dimensions (WxDxH) | 114 x 47 x 20 mm |
Turn off the main power switch at the fusebox or consumer unit before electrical work.
Identify the existing doorbell transformer and prepare to install the new 24VAC unit.
Examine internal doorbell connections to find wires powering its mechanism.
Insert identified power wires into the Pro Power Kit's bypass mode holes.
Instructions for replacing a transformer integrated directly into the internal doorbell unit.
Unscrew the old doorbell from the wall and disconnect its wires.
Use the Ring Doorbell as a template to mark and drill mounting holes.
Attach doorbell wires to the Ring Doorbell terminals.
Mount the doorbell to the wall and restore power at the breaker.
Obtain the Ring app from your device's app store and open it.
Select "Ring Video Doorbell Pro" and follow the on-screen prompts for configuration.
Attach a faceplate to the doorbell and secure it with a security screw.
Connect the Chime to power and set it up through the Ring app.
Enable and customize notifications for button presses and motion detection in the app.
Access live video, speak to visitors, and manage audio settings via the app.
Create customizable motion zones in the app to trigger alerts.
Manage phone notifications and learn about the optional Ring Protect recording service.
Ensure the doorbell has sufficient charge time after installation if it fails to turn on.
Check Wi-Fi signal strength and test network connection for optimal performance.
Troubleshoot problems finding or connecting to the Ring Wi-Fi network during setup.
Interpret flashing light patterns on the doorbell to diagnose setup errors.
Verify microphone permissions are enabled in Ring app settings on your mobile device.
To Next Page
