ring Doorbell Pro 2 - Securing Doorbell and Restoring Power; Screw in Your Ring Doorbell; Restore Power at the Breaker; Long Mounting Screw Warning

18 19
Restore power at the breaker.
It may take a moment for your
Ring Doorbell to power on.
You’ll know it’s ready once it
lights up and speaks to you.
Screw in your Ring Doorbell.
Mount your Ring Doorbell
with the two included long
mounting screws.
Be sure to feed any excess wiring
back into the wall first. If you
used the wire nuts, push them
through the hole as well.
3/16"
Security
screw
1-3/8" Long
mounting
screw
5/8" Short
mounting
screw
DO NOT USE any screw other than the
included long mounting screws when
securing your Ring Doorbell.