ring Motion Sensor User Manual

Remove the
base.
Slide the base down
to remove it from
your Motion Sensor.
If installing on a
masonry surface,
use the base as a
template to mark
pilot holes. Drill the
holes and insert
the anchors.
Drive the screws.
Hold the base firmly against the surface
and drive the two mounting screws.
Then slide your
Motion Sensor back
onto its base until it
clicks into place.
Your Motion Sensor works
best when mounted 4-6
feet above the ground.
2. Install your
Motion Sensor.
Attach the Motion Sensor.
6

ring Motion Sensor Specifications

General

Brand	ring
Model	Motion Sensor
Category	Accessories
Language	English