Ring Doorbell Pro
installation components
1 Screwdriver - Use the Phillips end for the mounting
screws and star-shaped end for the security screw.
3 Anchors - Use 2 for installing on concrete, stucco,
brick or any other masonry surface.
1 Drill Bit - To drill holes for the (optional) anchors.
3 Mounting Screws - Use two to mount your Ring.
2 Security Screws - Use one to secure the faceplate.
2 Extra Wires - To attach the power wires to your Ring
if necessary.
2 Wire Connectors - To connect the extra wires
(above) to the power wires.
1 Power Adapter - Plug it into an outlet to power your
Ring Doorbell Pro.
6
To Next Page
Loading...
