Place it at your chosen location, then plug it in. Your Stick Up Cam is now
ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure
you have the view you want.
If you’d like a downward camera angle...
Swivel the base around so that the long side faces the front, then tilt your
Stick Up Cam so it points downward.
How to use Stick Up Cam
on a table or shelf:
1
12
3
1
12
Swivel the base so the long side faces the front.
Insert and drive the security screw into the base screw location with a
standard Phillips-head screwdriver (not included).
Turn your Stick Up Cam over to access the battery compartment screw
hole, and drive the second security screw.
3
Install the security screws (optional).
Your Stick Up Cam comes with two optional security screw locations.
One secures the battery compartment, and the other secures the mounting
bracket to the base. To use them, open the battery compartment and/or
remove the mounting bracket, then pop out the rubber plug(s).
1
12
3
76
To Next Page
Loading...
