ring Stick Up Cam Plug-In Setup And Installation Guide

How to install Stick Up Cam
on a wall:
Remove the base.
Unscrew it using a standard Phillips-head screwdriver (not included).
Re-attach the base.
Screw it into the back of your Stick Up Cam
with the “UP” arrow on the bracket pointing
upward.
Remove the mounting bracket.
Slide it down to remove it from the base.
Drive the screws.
Hold the bracket against your
wall, making sure the “UP” arrow
is pointing upward, and mount it
with the included screws.
98

ring Stick Up Cam Plug-In Specifications

General

Type	IP security camera
Operating frequency	2400 MHz
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Wi-Fi	Yes
Ethernet LAN	-
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Built-in HDD	No
Form factor	Box
Mounting type	Desk/Wall
Product color	White
Minimum illumination	- lx
Number of sensors	1
Operating temperature (T-T)	-20 - 50 °C
Mobile operating systems supported	Android, iOS
Total megapixels	- MP
Maximum resolution	- pixels
Audio system	2-way
Harmonized System (HS) code	85258900

Weight and Dimensions

Width	60 mm
Height	97 mm