ring Stick Up Cam Wired User Manual

Push the rubber pad
back into the base.
The rubber pad should sit
between your wall and the
base of your Stick Up Cam.
Snap the cover back
onto the base.
Then, secure it with the
included security screw,
using the star-shaped end
of the screwdriver bit.
Now your Stick Up Cam
is installed and ready to
protect you.
Drive the screws.
Hold the round part of the base against your wall, rubber-
side down. Use the integrated level to ensure it’s straight.
Then mount it with the included screws.
11

ring Stick Up Cam Wired Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired & Wireless
Bluetooth	-
Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	1
Power source type	AC, PoE
Total megapixels	- MP
Maximum resolution	- pixels
Supported video modes	1080p
Cables included	LAN (RJ-45), Micro-USB
Minimum illumination	- lx
Audio system	2-way
Operating temperature (T-T)	-20.5 - 48.5 °C
Form factor	Box
Mounting type	Ceiling/Wall/Desk
Product color	Black
Mobile operating systems supported	Android, iOS
Harmonized System (HS) code	85258900

Weight and Dimensions

Width	60 mm
Height	97 mm