Need help?Do you have a question about the ring Indoor Cam and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Operating frequency | 2400 MHz |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Remotely operated | Yes |
| Power source type | AC |
| Number of lenses | 1 |
| Sensor type | - |
| Minimum illumination | - lx |
| Form factor | Box |
| Product color | White |
| Audio system | 2-way |
| Total megapixels | - MP |
| Maximum resolution | - pixels |
| Supported video modes | 1080p |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Operating temperature (T-T) | -20 - 45 °C |
| Mobile operating systems supported | Android, iOS |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Width | 46 mm |
|---|---|
| Height | 75 mm |
Walks you through setting up and managing your Indoor Cam. Download on iOS or Android.
Plug the included power cable into the back of the Indoor Cam and then into an outlet.
In the Ring app, select Set Up a Device, then Security Cams and follow in-app instructions.
After setup, tap the Live View button in the Ring app to see live video from your Indoor Cam.
If the light is flashing, it's updating its software. Do not unplug while flashing.
Indoor Cam is happy anywhere inside. Place on a flat surface or mount to a wall, within reach of power.
Plug in, place at your chosen location. Check live video in the Ring app to confirm view.
Failure to follow safety instructions could result in fire, electric shock, or injury/damage.
To Next Page