To Next PageTo Next PageWhat to do if there is a power failure with my Rinnai EX08C (RHFE-202FTA)?
If there is a power failure while the appliance is on, the Rinnai Furnace will start automatically when the power is restored. Alternatively, you can push the On/Off button to attempt a restart after the power returns.
Defines safety alert symbols (DANGER, WARNING, CAUTION) for hazard communication.
Details essential behaviors and precautions for safe appliance use, maintenance, and electrical safety.
Describes built-in safety mechanisms like overheat protection, flame failure, and power surge protection.
Lists detailed technical specs for EX08C/EX11C models, including performance, dimensions, and ratings.
Highlights key operational features and benefits for user convenience and efficiency.
Describes available flue manifold kits and their compatibility with different wall thicknesses for installation.
Introduces appliance parts and explains control panel functions, basic operations, and settings.
Guides on programming timers, using Economy mode, and setting the clock for optimal heating.
Covers routine care, common issues, visual flame checks, fault codes, and resolution steps.
Outlines essential safety, code compliance, electrical grounding, and placement guidelines.
Details procedures for gas supply connection, clearances, and flue hole preparation.
Explains how to install flue manifolds and optional extension kits for venting.
Guides on setting gas pressure and completing the final installation steps.
Presents an illustrated breakdown of the appliance's components with numerical references.
Provides a comprehensive list of parts with part numbers, names, and quantities for EX08C/EX11C models.
Provides details on the limited warranty, including what is covered and for how long.
Explains the process for getting service, required proof of purchase, and warranty exclusions.
General
