Installation and Programming Manual
3-74
REPORT CODES: ACCESSORY CODES (cont’d)
Quick Key Item Default Explanation
Wireless Button * --- press [ENTER] to access each sub-category, below
6 0 3 1
Wireless Button Low
Battery *
00
report code used to represent its low battery
condition
6 0 3 2
Wireless Button Low
Battery Restore *
00
report code used to represent the correction of its low
battery condition
6 0 4 Printer Module * --- press [ENTER] to access each sub-category, below
6 0 4 1 Printer Trouble
enter the Printer Module’s 1-digit physical I.D. and
the 2-digit report code used to represent the
incidence of a printing difficulty, as detected by the
module
if this event is not to be transmitted, use the “00”
default
press the [.] key to return to the previous
programming level
6 0 4 2 Printer Trouble Restore
using either the UP- or DOWN-arrow keys, enter the
Printer Module’s 1-digit physical I.D. and the 2-
digit
report code used to represent the restoral-to-
normal
of the printing difficulty, above
if this event is not to be transmitted, use the “00”
default
press the [.] key to return to the previous
programming level
6 0 4 3 Printer Buffer Full
report code used to represent a full buffer in the module
(reflecting a printing difficulty)
6 0 4 4
Printer Buffer Full
Restore
code used to represent the restoral-to-normal of the
module’s buffer
* Not for UL Installations
INSTALLER PROG:
6)REPORT CODES
↓
To Next Page
Loading...
