Installation and Programming Manual 3-85
8) Miscellaneous
This section of Installer Programming makes it possible for the Pro-24 to allocate the data it receives from any of
the system’s Wireless Buttons–in a process often referred to as “learning-in”. For the system to utilize any Wireless
Button, it needs to have installed both the Wireless Expansion Module, along with the Wireless Button Module. For
additional information, consult the instructions supplied with the Wireless Button Module and the Wireless Buttons.
With the display showing:
MISCELLANEOUS
Quick Key Item Explanation
8 MISCELLANEOUS allows for the “learning in” of wireless button transmitters
8 1
Wireless Button
Allocation
Not for UL
Installations
using either the UP- or DOWN-
arrow keys, position the cursor
and make any changes to the
Button Number you wish to
“learn in” to the system
press [ENTER]
select one of these displays:
pressing [ENTER] allows skipping
to the next button
to write (or overwrite) data into the
selected location, press [ENTER]
to erase the data in the selected
location, press [ENTER]
confirm your choice by pressing
[STAY] and [ENTER]
BUTT=01 (EMPTY):
1) SKIP ↓
BUTT=01 (EMPTY):
2) (RE)WRITE ¤
BUTT=01 (EMPTY):
3) ERASE ↑
BUTT ALLOCAT:
BUTT#=01 (1:01)
INSTALLER PROG:
8)MISCELLANEOUS¤
press [ENTER] to begin. The only sub-category, WIRELESS BUTTON
ALLOCATION will appear on the display. You may enter it by pressing
[ENTER] OR by pressing the [1] key.
INSTALLER PROG:
8)MISCELLANEOUS
↓
ERASE LOCATION
ARE YOU SURE? N
To Next Page
Loading...
