Installation and Programming Manual
3-66
6 3 5
Wireless Button
Accessory
Not for UL
Installations
---
addresses the tamper codes and their restorals given to
any wireless buttons used in the installation; press
[ENTER]
6 3 5 1 Tamper --- press [ENTER] to begin
00 enter the Wireless Button’s 1-digit I.D. and the
corresponding 2-digit report code used to represent a
tamper condition
6
3
5
2
Wireless Button
Accessory
Tamper Restore
--- press [ENTER] to begin
00 enter the Wireless Button’s 1-digit I.D. and the
corresponding 2-digit report code used to represent
the restoral-to-normal of the tamper condition
6 3 6
Wireless Zone
Expansion Module
Not for UL
Installations
---
addresses the tamper codes and their restorals given to
Event Logging modules; press [ENTER]
6 3 6 1 Tamper --- press [ENTER] to begin
00 enter the Zone Expander’s 1-digit physical I.D. and
the corresponding 2-digit report code used to
represent a tamper condition on the designated Zone
Expander
6 3 6 2
Wireless Zone Module
Tamper Restore
press [ENTER] to begin
00 enter the Zone Expander’s 1-digit physical I.D. and
the corresponding 2-digit report code used to
represent a restoral-to-normal of the tamper condition
on the designated Zone Expander
To Next Page
Loading...
