Installation and Programming Manual 3-69
REPORT CODES: POWER SUPPLY ACCESSORY
MODULE TROUBLE RESTORALS
Quick Key Item Default Explanation
POWER SUPPLY
ACCESSORY
MODULE TROUBLE
RESTORALS
---
• used to report the codes generated when the
following series of troubles related to the
operation of the Power Supply Accessory Module
is detected (or restored)
• press [ENTER] to begin
6 5 2 Trouble Restorals ---
addresses the trouble restoral codes assigned to
the Power Supply Accessory Module;
press [ENTER]
Low Battery --- press [ENTER] to begin
6 5 2 1
00 enter the PS Module’s 1-digit physical I.D. and the 2-
digit report code used to represent the restoral-to-
normal of a weak (or missing) standby battery wired
to the module
Bell --- press [ENTER] to begin
6 5 2 2
00 enter the PS Module’s 1-digit physical I.D. and the 2-
digit report code used to represent the restoral-to-
normal of a supervisory condition involving an
external sounder wired to the module
AC --- press [ENTER] to begin
6 5 2 3
00 enter the PS Module’s 1-digit physical I.D. and the 2-
digit report code used to represent the restoral-to-
normal of the AC Power supplied to the module
AUX --- press [ENTER] to begin
6 5 2 4
00 enter the PS Module’s 1-digit physical I.D. and the 2-
digit report code used to represent the restoral-to-
normal of the Auxiliary Power supplied by the module
INSTALLER PROG:
6)REPORT CODES
↓
To Next Page
Loading...
