Installation and Programming Manual 3-71
REPORT CODES: DISARM (OPENING) CODES
Quick Key Item Default Explanation
6 7
DISARM
(OPENING)
CODES
---
• used to report the Opening Signals generated
when the system is DISARMED (opened)–under a
variety of conditions)
• press [ENTER] to begin
DISARM ---
User Disarmed --- press [ENTER]
6 7 1
00 report code representing a system disarming
(opening) event by a particular user
Keyswitch Disarmed * --- press [ENTER]
6 7 2
00 report code used when the system is disarmed via a
keyswitch
note that no specific user identification is possible
Auto Disarmed --- press [ENTER]
6 7 3
00 report code used when the system is Auto-Disarmed
as a result of a previously-scheduled user-determined
event
note that no specific user identification is possible–
see the Pro-24 User’s Manual for additional
information
Remote Disarmed --- press [ENTER]
6 7 4
00 report code used when the system is Remotely-
Disarmed as a result of actions performed by the
Alarm Company using its Upload/Download software
“Wireless Button”
Disarmed *
--- press [ENTER]
6 7 5
00 report code to be generated when the system is
disarmed with this device
6 8
MISCELLANEOUS
---
• used to report miscellaneous events to the
Central Station
• press [ENTER] to begin
Enter Programming --- press [ENTER]
6 8 1
00 report code used when the system’s Installer
Programming Mode is entered–either locally (via the
LCD Keypad), or remotely (via the Upload/Download
software)]
Exit Programming --- press [ENTER]
6 8 2
00 report code used when the system’s Installer
Programming Mode is terminated–either locally (via
the LCD Keypad), or remotely (via the
Upload/Download software)
Periodic MS Test --- press [ENTER]
6 8 3
00 report code used when the system’s periodic Central
Station (MS) Test transmissions take place (refer to
page 3-61 for a detailed explanation)
Periodic U/D Test * --- press [ENTER]
6 8 4
00 report code used when the system’s periodic
Upload/Download (Auto Batch) transmissions take
place
Call Back Request --- press [ENTER]
6 8 5
00 report code used when the system automatically calls
back the Alarm Company’s Upload/Download
software
System Reset --- press [ENTER]
* Not for UL Installations
INSTALLER PROG:
6)REPORT CODES
↓
To Next Page
Loading...
